# Yaskawa 2200 conection **URL:** \ **Category:** General Discussion\ **Created:** [May 27, 2026, 3:30pm UTC](https://forum.inductiveautomation.com/t/yaskawa-2200-conection/115735 "2026-05-27T15:30:52Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![dkhayes117](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dkhayes117/32/68344_2.png) [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\ **Post date:** [May 27, 2026, 5:40pm UTC](https://forum.inductiveautomation.com/t/yaskawa-2200-conection/115735/2 "2026-05-27T17:40:35Z")
MODBUS/TCP should be an option for this device. You might can even use EtherNet/IP if you have the 263IF-01 comms module, which might work with Phil's Ignition module for that. I'm not sure if the module works on Ignition Edge. A different model, but may have some useful insights, [Yaskawa MP2600iec, What module for Connectivity? - Ignition - Inductive Automation Forum](https://forum.inductiveautomation.com/t/yaskawa-mp2600iec-what-module-for-connectivity/65133/2) You could also use Kepware Server as a middleware between the PLC and Ignition. [Yaskawa Suite | Kepware | PTC](https://www.ptc.com/en/store/products/kepware/suites/yaskawa-memobus-plus-suite) This will most likely lock you into Windows to run the Kepware server, though. --- _[View the full topic](https://forum.inductiveautomation.com/t/yaskawa-2200-conection/115735)._