# Z-Wave drive and OPC server for Zigbee from Matrikon **URL:** \ **Category:** Maker\ **Created:** [July 31, 2020, 3:54am UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242 "2020-07-31T03:54:50Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![edy52](https://avatars.discourse-cdn.com/v4/letter/e/53a042/32.png) [@edy52](https://forum.inductiveautomation.com/u/edy52)\ **Post date:** [July 31, 2020, 3:54am UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242/1 "2020-07-31T03:54:51Z")
Continuing the discussion from [Devices in the retail space that Maker can connect to today](http://forum.inductiveautomation.com/t/devices-in-the-retail-space-that-maker-can-connect-to-today/36642): I hope everyone continue to stay safe and healthy My guess Z-Wave driver you have mentioned from [GitHub.com](http://GitHub.com) is unsigned. Any idea how to make it work? Is it required a development license? As well you mentioned Travis Z-Wave driver is it the same driver from [Github.com](http://Github.com) of different? Matrikon works on OPC server for Zigbee devices and looking for Beta Testers Maybe worth a shot Stay safe ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [July 31, 2020, 3:01pm UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242/2 "2020-07-31T15:01:46Z")
The instructions to allow unsigned modules are in the github repo for the z-wave driver: > **[IgnitionModuleDevelopmentCommunity/ZWaveDriver](https://github.com/IgnitionModuleDevelopmentCommunity/ZWaveDriver#getting-started)** > > The Z-Wave Driver Module for Ignition allows you to observe and control connected Z-Wave devices - IgnitionModuleDevelopmentCommunity/ZWaveDriver ---
**Author:** ![edy52](https://avatars.discourse-cdn.com/v4/letter/e/53a042/32.png) [@edy52](https://forum.inductiveautomation.com/u/edy52)\ **Post date:** [July 31, 2020, 4:20pm UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242/3 "2020-07-31T16:20:42Z")
Thanks I have tried didn’t work for me Will try again Regards Edward ---
**Author:** ![edy52](https://avatars.discourse-cdn.com/v4/letter/e/53a042/32.png) [@edy52](https://forum.inductiveautomation.com/u/edy52)\ **Post date:** [August 2, 2020, 12:03pm UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242/4 "2020-08-02T12:03:14Z")
I have found an easy way to use unsigned modules. If network cable unplugged no problem to add unsigned module. Ed ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [August 2, 2020, 2:59pm UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242/5 "2020-08-02T14:59:42Z")
That would be a bug. And probably won’t continue working if Ignition restarts while connected. ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [August 3, 2020, 3:42pm UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242/6 "2020-08-03T15:42:10Z")
“Didn’t work for me” is pretty vague. Can you upload your `ignition.conf` file? ---
**Author:** ![edy52](https://avatars.discourse-cdn.com/v4/letter/e/53a042/32.png) [@edy52](https://forum.inductiveautomation.com/u/edy52)\ **Post date:** [August 13, 2020, 4:02pm UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242/7 "2020-08-13T16:02:14Z")
I agree is pretty vague. I have tried on different PC the same way unplugged cable and install unsigned module. unless it is a coincidence. ---
**Author:** ![msteele](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/msteele/32/77889_2.png) [@msteele](https://forum.inductiveautomation.com/u/msteele)\ **Post date:** [June 29, 2022, 3:36pm UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242/8 "2022-06-29T15:36:14Z")
Any idea what happened to the ZWaveDriver on github? Edit: It looks to be available here: [GitHub - syuan409/ZWaveDriver: The Z-Wave Driver Module for Ignition allows you to observe and control connected Z-Wave devices](https://github.com/syuan409/ZWaveDriver) ---
**Author:** ![swolnisty](https://avatars.discourse-cdn.com/v4/letter/s/7bcc69/32.png) [@swolnisty](https://forum.inductiveautomation.com/u/swolnisty)\ **Post date:** [July 11, 2022, 3:33pm UTC](https://forum.inductiveautomation.com/t/z-wave-drive-and-opc-server-for-zigbee-from-matrikon/37242/9 "2022-07-11T15:33:49Z")
Travis mentioned that he took it down due to better options being available: > [@Issues getting the Z-Wave Driver module up and running](https://forum.inductiveautomation.com/t/issues-getting-the-z-wave-driver-module-up-and-running/57679/4): > > Just a FYI, I have taken down the ZWave Driver for Ignition project from Github as there are much better tools to use these days. For example, you can use the ZWave to MQTT project: [https://zwave-js.github.io/zwavejs2mqtt/](https://zwave-js.github.io/zwavejs2mqtt/)