Alarm Table Filters not working in Perspective

[danny.lazaro]

Hi Everyone,

I am using Ignition 8.3. Has anyone experienced issues with the alarm filters? It seems that the Priority/Show All filter is not working properly on my project. This is the issue I have identified, let's take this critical alarm that is Cleared-Unacked as an example.

• When the Alarm is Cleared-Unacked and Priority Filter is set to Show All: No alarms are shown
  

  

• However, when the Alarm is Cleared-Unacked and Priority Filter is set to Critical: The alarm is shown as it should.
  

  

Let me know what you think, I might be missing something haha. Thanks in advance!

Best Regards,
Danny

[tgarrison]

Might be related to this:

system.alarm.queryStatus() inconsistent results

Came across what appears to be a bug in system.tag.queryStatus(). I've got a ticket open with support already, but figured I'd post here so others can know about it. when calling system.tag.queryStatus(status=['ClearUnacked']) I'm getting different results then when I run system.tag.queryStatus(status=['ClearUnacked'], priority=[0,1,2,3,4]). Without declaring all the priorities, I'm missing alarms... Same with the other status. Basically, it appears that not explicitly declaring all the …

I'm still working with support on it.

[Steve_Laubach]

I haven't.

What version of Ignition are you running? That will help QA check it out (they monitor the forums)

[danny.lazaro]

You might be right. I'll keep an eye on your post, hopefully support takes care of it!

[danny.lazaro]

Good point, I added it to the post, Ignition 8.3.