ARSCADA - Augmented Reality Module for Ignition

#1

what is your opinion on Augmented Reality Interface to SCADA
[poll type=multiple max=5]

  • Extremely useful to operator
  • Somewhat useful
  • Can’t say we have to try and see
  • Doesn’t add any value
  • Not useful at all
    [/poll]
    Dear All,

We have developed an [color=#0000BF]Augmented Reality[/color] Interface module called [color=#0000FF]ARSCADA[/color] for Ignition. This allows an operator to take a [color=#0000FF]virtual tour[/color] of the plant and monitor and control it while taking the virtual tour.

Please visit our web site http://www.pramanj.com and product web site http://www.arscada.com and watch the youtube demo and tutorials of ARSCADA package. Please pass on the information to your Ignition customers. ARSCADA can be retrofitted in existing Ignition installation as well as new ones.

Regards
PRAMANJ

0 Likes

#2

I suggest that, before any voting is done, the other three duplicate posts/polls be removed.

0 Likes

#3

Done. I got server error 404 so I posted it again and again, but I didn’t realize that it had published it each time! It took me a while to figure out how to delete a post.
Regards
PRAMANJ

0 Likes

#4

No worries. Just helpful to have all your votes in one spot. :wink:

0 Likes

#5

interesting to see VR in ignition, nice try!! but the the effects and real benefits presented in your demo didn’t impress me too much. actually there is a quite interesting VR SCADA Solution called ReplicAnt VR which really shocked me with the effects. SCADA is not game or movie, not sure how much added benefits there are with the AR technology.

0 Likes

#6

hi Can you add my Skype ID so that we could further discuss about AR used in Ignition?
my skype id: talljack

[quote=“Pramanj”]Dear All,

We have developed an [color=#0000BF]Augmented Reality[/color] Interface module called [color=#0000FF]ARSCADA[/color] for Ignition. This allows an operator to take a [color=#0000FF]virtual tour[/color] of the plant and monitor and control it while taking the virtual tour.

Please visit our web site http://www.pramanj.com and product web site http://www.arscada.com and watch the youtube demo and tutorials of ARSCADA package. Please pass on the information to your Ignition customers. ARSCADA can be retrofitted in existing Ignition installation as well as new ones.

Regards
PRAMANJ[/quote]

0 Likes

#7

Hi,
The problem with full VR modelling is that its too expensive. The ARSCADA leverages the advances in panoramic imaging technology to circumvent the problem. The ARSCADA is priced just $500 and its very easy to take the panoramic images and integrate with Ignition thru ARSCADA. Ofcourse it cannot be as powerful as the full 3D VR Modelling, but its a good trade off between cost and functionality.

BR
PRAMANJ

0 Likes

#8

Hi Pramanj, I’m really interested about your module.
How can I contact you to try it?
I wrote you at your e-mail address but without answer.
Thank you.

0 Likes

#9

The AR module has undergone significant changes from its initial inception , such as switch over from TOMCAT server to NodeJS server. Its still undergoing another significant change in the way it integrates with Ignition. I hope to complete the change and test it out and release it ASAP.

(By the way, I didn’t receive any mail from you on my mail ID given on my web site? Which one did you write to and when?)

0 Likes

#10

thank you, so I’ll wait your updates.
(I tried contact you with your website form and also using an email address found on web.
Thank you

0 Likes

#11

It should be out soon. BTW , the mail (pramanj2015@gmail.com should work fine. Do you remember the date when you wrote the email or forward it again?. Just trying to see if there is any failure in email system.

regards

0 Likes

#12

Hi all,

I am glad to announce the release of ARSCADA version 1.3. The eval version for Ignition version 7.9 and 8 are available on github for download.

Please see a you tube video https://youtu.be/Zawj5tFUhas (unfortunately it hasn’t come well at a few places, will try to record a better one).

Evaluation version is available on github.https://github.com/PRAMANJ/ARSCADA.

Ignition sample project file for version 7.9 is at ARS/docs/new_2019-02-25_1055.proj and for version 8.0 is ARS/docs/new_2019-02-15_1846.proj

Unfortunately only one virtual tour could be uploaded due to size restriction of 100 files. (all tours make it more than 500 files and about 30MB.)

Request you to evaluate it and try it on your customer project.

Sample projects for other versions of Ignitions are available on request.
Please feel free to ask any questions our doubts or clarifications, bugs, suggestions.
visit web site www.pramanj.com for licensing terms and conditions under BUY tab…

Best Regards

Prafull Jaltare

PRAMANJ Technologies.
www.pramanj.com

0 Likes

#13

This recording may be of interest to some of you.

0 Likes

#14

Hi all,

Here is an update on AR SCADA addon module to Ignition. The step by step instructions for installing AR SCADA trial version are added on the github readme file and sample ignition project (new_2019-03-25_0933.proj) added for Ignition version 7.9.10, and the same is given below. For version 8 sample project file already available in the docs folder. For any other version of Ignition, please request a project file to get started. Please see the introduction video to AR SCADA

Installation procedure for AR-SCADA trial version is as follows:

(Important (based on feedback) : It is assumed that you have the webDev module installed on your Ignition server you are using. If not the download it from url https://inductiveautomation.com/downloads/archive -> choose the proper Ignition version -> scroll down to Device Connectivity modules -> select WevDev module , and Install it on your Ignition server from configure/modules page of Ignition)

  1. ·Download the evaluation version of AR-SCADA from https://github.com/PRAMANJ/ARSCADA as a zip file on your system

  2. ·The zip file will be downloaded with name ARSCADA-master.zip on your system.

  3. ·Extract the zip file and it will create a folder ARSCADA-master where ever it’s kept.

  4. ·Enter the folder ARSCADA-master it will contain a ARS folder

  5. · Copy the ARS folder and paste it at C: and you should have the ARS demo version installed on C:\ARS directory.

  6. ·There are two sample projects kept under folder C:\ARS\DOCS named new_2019-03-25_0933.proj and new_2019-02-15_1846.proj for Ignition version 7.9.10 and 8 respectively. If your Ignition version is one of these then import the respective project in Ignition using designer and you are ready to launch AR-SCADA client. For any other versions please request the project file.

  7. · Open the file C:\ARS\viewer\embedhost.js and change the hostname in the URL to your ignition server host name and project name to new (or to your project name if it’s other than default) and save the file.

  8. ·Ensure your ignition is running on the server (in case it’s a trial version, ensure to start trial period).

  9. ·Open a latest HTML5 browser (preferably chrome, as AR-SCADA was developed and tested on chrome).

  10. open link http://<hostname>:8088/main/system/webdev/new/ARS/systemlist.html where replace <hostname> with your ignition’s host name (to get host name open command prompt on the Ignition server and type hostname on the command prompt and press enter, it will display the hostname, copy and paste it where ever required. Your URL should look like http://pramanj:8088/main/system/webdev/new/ARS/systemlist.html

The demo should work now. It will stop updating values after 60 seconds then you can refresh or change page to continue.

0 Likes

#15

Hi,

We have added tutorial on installation and usage of AR SCADA module, split in two parts (to reduce the size).


(In part 2, the audio is missing for 2 mins from 7.15 to 9.35 mins, explaining the cursor position component, please continue, its ok after that). Name of the 360 degree camera is Insta air 360 (not air 360 as mentioned in the tutorial by mistake).

Please feel free to ask questions/clarifications etc on the ARSCADA module.

Best Regards
PRAMANJ Technologies
www.pramanj.com

0 Likes

#16

Just a clarification that the webdev module for Ignition 8 can be found at link https://inductiveautomation.com/downloads/ignition since its not clearly visible.
For other versions the webdev can be found at downloads/archive as given in step by step instructions on github page.

0 Likes