Omron CS1 using FINs TCP or UDP

Ignition
1

Hi
I am currently trying to connect to Omron CS1 controller on ignition gateway 8.1 running Windows Server 2019 OS.
Omron Driver 4.1.14 is currently running on gateway. Driver is displaying ReconnectWait. I can’t see any error under logs either. Is there anything which can be done to troubleshoot this?

Currently i have Wonderware configured for FINS driver and it is currently working with this omron PLC.

2

With ReconnectWait, you should verify if you can ping/telnet the device’s IP address with the correct port number from your Ignition gateway.

You can check this port reference guide for the port number you should have open on your firewall for Omron devices.
https://docs.inductiveautomation.com/display/DOC81/Gateway+Port+Reference#:~:text=for%20SIP%20server.-,9600,-Outgoing