Mitsubishi Q series aren’t too difficult to add to Kepware. If you have the QJ71E71-100 Ethernet module you’ll have to open up a port on that through the settings. In Kepware This is what you’ll have to put in for the ID:
example: 192.168.0.10:N1:20
in the format of IPAddress:Network Number:Station Number
Under Communication Parameters you’ll match the port number to what you used when you open the port in the QJ71 card:
QJ71E71-100 Settings:
The second opened port is for connecting via GXWorks software through the Ethernet port.